● Rohs requirements.
● 105℃ 2000 hours series.
● Used for switching power supply, servo, frequency converter, air conditioning,
filter circuit, laser spot welding machine, consumer electronics, printed circuit
board and other general industrial products.
■ Product description
| Item | Characteristic | ||||||||||
| Operating temperature range | -40℃～+105℃ | ||||||||||
| Rated voltage(WV/V) | 25V～450V | ||||||||||
| Capacitance(CAP/C) | 220～470000 | ||||||||||
| Tolerance(CAP/C) | ±20% (25℃, 120Hz) | ||||||||||
| Leakage current LC/I(25℃，120Hz) | LC≤0.01CV(uA) or 1.5mA,take the smaller value (25℃,5minutes)C=Nominal capacitance(μF),V=Working voltage(V) | ||||||||||
| Dissipation factor DF/tanδ(25℃，120Hz) | UR(V) | 25～35 | 50 | 63 | 80～100 | 160～200 | 250～500 | ||||
| DF | Check specifications | 0.2 | 0.2 | ||||||||
| Temperature characteristics (Capacitance ratio at 120Hz) | C(-40℃/C(+25℃)≥0.6 | ||||||||||
| C(-25℃/C(+25℃)≥0.7 | |||||||||||
| Working lifetime | Standard lifetime | Durability | High temperature storage | ||||||||
| Load time | 4000h | >200000h | 2000h | 2000h | 1000h | ||||||
| Leakage current LC/I(25℃，120Hz) | Within the rated specification value. | Within the rated specification value. | Within the rated specification value. | Within the rated specification value. | |||||||
| Capacitance change | Within ±30% of initial value | Within ±20% of initial value | Within ±20% of initial value | Within ±20% of initial value | |||||||
| Dissipation factor | Within 300% of rated specification value | Within 200% of rated specification value | Within 200% of rated specification value | Within 200% of rated specification value | |||||||
| Environmental condition: Applied voltage | UR | UR | UR | UR | UR＝0 | Apply rated working voltage for 60 minutes, and conduct the test after 24-hour recovery. | |||||
| Applied current | IR | 1.2×IR | IR | IR＝0 | IR＝0 | ||||||
| Application temperature | 105℃ | 40℃ | 105℃ | 105℃ | 105℃ | ||||||
■ Ripple current correction factor
| Temp.℃ | 40 | 55 | 70 | 85 | 105 | Freq. | 50/60Hz | 120Hz | 300KHz | 1KHz | ≥10KHz |
| UR(V) | UR(V) | ||||||||||
| 25～100 | 4.9 | 3.9 | 3.0 | 1.8 | 1.0 | 25～100 | 0.95 | 1.00 | 1.04 | 1.10 | 1.15 |
| 160～250 | 3.8 | 3.3 | 2.5 | 2.0 | 1.0 | 160～250 | 0.90 | 1.00 | 1.08 | 1.15 | 1.20 |
| 350～450 | 2.44 | 2.28 | 2.12 | 2.0 | 1.0 | 350～450 | 0.80 | 1.00 | 1.18 | 1.35 | 1.40 |
■Drawing unit：mm
 | Capacitors with screw terminals series | ||||||||||
| ΦD±1 | P±1 | S±0.5 | T±1 | CAP material | |||||||
| 36 | 12.7 | M5×10 | 6 | EP | |||||||
| 51 | 22 | M5×10 | 6 | EP | |||||||
| 64 | 28.6 | M5×10 | 6 | EP | |||||||
| 77 | 31.4 | M5×10 | 6 | EP | |||||||
| 90 | 31.4 | M5×10 | 6 | EP | |||||||
| 101 | 41.5 | M8×17 | 10 | EP | |||||||
■ Life curve
| |||||||||||
| Multiplier of useful life as a function ofambient temperature and ripple current load ＩＡ：actual ripple current at 120Hz,IR:rated ripple current at 120Hz 105℃ | |||||||||||
Product Recommend
LPS 450v 5600uf 85℃ 2000 hours standard screw capacitor
● Rohs requirements.
● 85℃ 2000 hours series.
● Used for switching power supply, servo, frequency converter, air conditioning,
filter circuit, laser spot welding machine, consumer electronics, printed circuit
board and other general industrial products.
LKS 450v 560uf 85℃ 2000 hours,standard snap-in capacitor
● Rohs requirements.
● 85℃ 2000 hours series.
● Used for switching power supply, servo, inverter,air conditioners, filter circuits, laser welding machines, consumer electronics, and printed circuit boards and other general industrial products.
LHS 400V 820uf 105℃ 2000 hours,standard snap-in capacitor.
● Rohs requirements.
●105℃ 2000 hours series.
● Used for switching power supply, servo, inverter, and other industrial products.
LPS 400v 3300uf 85℃ 2000 hours standard screw capacitor
● Rohs requirements.
● 85℃ 2000 hours series.
● Used for switching power supply, servo, frequency converter, air conditioning,
filter circuit, laser spot welding machine, consumer electronics, printed circuit
board and other general industrial products.
LPE 400v 4700uf 85℃ 12000 hours screw capacitor
● Rohs requirements.
● 85℃ for 12000 hours.
● Used for switching power supply, servo, inverter, medical electronics, photovoltaic solar energy, wind energy long life industrial products.
Latest News
May 16, 2024
Introduction to screw terminal capacitors and their unique features. Screw terminal capacitors are capacitors made up of metal screws and insulating pads, typically used in circuits with high voltage and large current.
May 23, 2024
Ensure the rated values (capacitance and voltage) of the electrolytic capacitors before installation. Confirm the polarity of the electrolytic capacitors before installation.
Which capacitors deal with corner frequency
May 30, 2024
Capacitors play a pivotal role in electronic circuits influencing various parameters including the corner frequency which is crucial in filter design.
Fill out our form to receive a customized quote and discover how Liron's expert team can meet your specific needs. Your optimal solution is just a click away!
中文 
Русский 
Deutsch 
عربي 
Español 
Français 
-tuya100_100.webp "400v 10000uf")
-tuya100_100.webp "400v 10000uf")
